MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 General Discuss
 Device AM27C010 Mismatches Device ID
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

TimothyTFrank

USA
1 Posts

Posted - 11/16/2017 :  10:38:51  Show Profile  Reply with Quote
Hello there. I have a device marked AM27C010, and have selected that device in the Device List. However, the ID command returns Device ID (Hex) 3F0E, Manufacture Not in Library, Type Unknown Device.

This seems incorrect to me.

I haven't been able to locate the specified device ID for Advanced Micro Devices AM27C010 (it isn't in the data sheet).

Do you have some information regarding the correct device? Is the programming configuration file incorrect? Etc etc.

Thank you in advance.
Reply #1

anniel

2543 Posts

Posted - 11/17/2017 :  06:36:13  Show Profile  Reply with Quote
quote:
Originally posted by TimothyTFrank

Hello there. I have a device marked AM27C010, and have selected that device in the Device List. However, the ID command returns Device ID (Hex) 3F0E, Manufacture Not in Library, Type Unknown Device.

This seems incorrect to me.

I haven't been able to locate the specified device ID for Advanced Micro Devices AM27C010 (it isn't in the data sheet).

Do you have some information regarding the correct device? Is the programming configuration file incorrect? Etc etc.

Thank you in advance.



Yes 3F0E is incorrect for an AMD AM27C010.
Yes the ID is on page 6 of 13 in the datasheet and corresponds to the one in the device definition file of USBPrg.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.11 sec. Snitz Forums 2000