MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 TOP USB Programmer
 Finally Top2049 will program 27CXXX eproms
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

ixlman

USA
8 Posts

Posted - 05/07/2008 :  12:49:27  Show Profile  Reply with Quote
Success at last! I downloaded version 3.27 of Topwinen and programmed two 27c256 eproms and it worked.
Reply #1

simeon

United Kingdom
79 Posts

Posted - 05/08/2008 :  16:31:44  Show Profile  Reply with Quote
hi all
i second that
i blew 6 eproms nmc27C256-200's earlier
no errors {except one wasnt cooked out and had to be erased again}

did like the new timings menus seems they got there stuff together
as i notice quite a few changes also it blew a few other roms i needed done
via the nice adapter set that came with it

so... what exactly is the sketch with other package types than the zif and two plcc sockets adapters

i got mine from china and dont see an easy list of avalible ones
ive had a look on the pages here and see them but not any sort of list of whats programmer works with what adapters

....???


machine toshiba equium laptop usb only type
p5b asus main machine
thinking of adding dual lpt pci card
both used for top and lpt via usb where i can

old p2 programming grumbling tank with xp sp3 for true serial and lpt

all machines bios set to enable bios plug and play aware o/s and lpt spollers services and drivers removed
legacy detection enabled
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000