| Author |
 Topic  |
|
|
hatster
Spain
2 Posts |
 Posted - 01/24/2024 : 12:14:35
|
Hi,
I just boug a GQ4x4 along with the ADP-054 adapter. The programmer seems to work fine without the adapter, but I cannot get it to read or write any 27c160 or 27c322.
I have set the jumper correctly, I have the chip positioned correctly in the ZIF. If I try to read a known good 27c160 from a working sega naomi board, i just get garbage, and every time I read it I get different garbage.
I tried it on 2x different computers, different usb ports, with and without a 9v adapter, firmware, drivers, etc are all the latest.
Is this just a pile of junk or is there some secret to make it work ?
Thanks, |
|
| Reply #1
anniel
2543 Posts |
Posted - 01/26/2024 : 07:31:31
|
quote:
Originally posted by hatster
Hi,
I just boug a GQ4x4 along with the ADP-054 adapter. The programmer seems to work fine without the adapter, but I cannot get it to read or write any 27c160 or 27c322.
I have set the jumper correctly, I have the chip positioned correctly in the ZIF. If I try to read a known good 27c160 from a working sega naomi board, i just get garbage, and every time I read it I get different garbage.
I tried it on 2x different computers, different usb ports, with and without a 9v adapter, firmware, drivers, etc are all the latest.
Is this just a pile of junk or is there some secret to make it work ?
Thanks,
Post pictures of your setup. |
 |
|
| Reply #2
hatster
Spain
2 Posts |
Posted - 01/30/2024 : 01:37:43
|
| thanks to the excellent support emails I have exchanged with the manufacturer this is now solved. It turned out the programmer was faulty, got a replacement and all works perfectly ! |
|
|
| Reply #3
anniel
2543 Posts |
Posted - 01/30/2024 : 07:00:49
|
quote:
Originally posted by hatster
thanks to the excellent support emails I have exchanged with the manufacturer this is now solved. It turned out the programmer was faulty, got a replacement and all works perfectly !
Good. |
|
|
| |
Topic |
|
|
|
ADP-054 problem
