MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 Willem PCB5.0C programmer error code
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

r3ll1k

USA
1 Posts

Posted - 02/15/2010 :  20:41:20  Show Profile  Reply with Quote
I have a Willem Enhanced USB programmer and I can read 27C4002 EPROMS without any issues but keep receiving the following error
quote:
error at 0x000000 chip = 0xFF buffer =0xEE


I'm using this adapter


Image Insert:

7.42 KB

Any ideas on what the issue might be?
Reply #1

ZLM

2937 Posts

Posted - 02/15/2010 :  21:49:47  Show Profile  Reply with Quote
If you got this error when you writing the chip, then the chip not been write correctly.

This error can be caused by many reason. You need to confirm programmer is working and then the adapter. Using Test H/W in software to check your programmer.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000