MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 Immo ST 95040 woes...
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

lave3k

USA
1 Posts

Posted - 08/07/2010 :  19:35:39  Show Profile  Reply with Quote
Trying to read/write a ST (SGS-Thompson Microelectronics)model ST 95040.

I have a GQ-4X which I just received, when I select the device I go to:
serial eeprom, ST, M95040

The program says no adapter required, but that is obviously incorrect. I am using a SOIC8 adapter which I purchased from MCUMALL.

The chip reads as though it is entirely blank, I also get the same result without errors and it verifies with nothing in the socket at all?

Any help would be greatly appreciated.
Reply #1

ZLM

2937 Posts

Posted - 08/08/2010 :  01:51:47  Show Profile  Reply with Quote
Check all pin contacting under a magnify glass.

Use blank check to confirm the chip is blank.

You can try to write some data and see if it can be verified after write.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000