MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Using The Enhanced/Dual power Willem Programmer
 Programming 27C322 and 27C160
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

ben1059

2 Posts

Posted - 08/13/2006 :  11:33:28  Show Profile  Reply with Quote
I just bought the dual power willem eprom programmer with the 16 bit adaptor. I didnt get the diy cable set but instead I got three jumper wires. I can't figure out how to program 27C322 and 27C160 eproms. There isn't anything in the instructions on how to do it nor is there anything in the software that helps.
Reply #1

ZLM

2937 Posts

Posted - 08/22/2006 :  11:39:50  Show Profile  Reply with Quote
The three jumper wires are for the address line A19,A20,A21. Just connect those address line from adapter's address pin header to main programmer's address pin header.

See: http://www.mcumall.com/forum/topic.asp?TOPIC_ID=106 for the main pin header on the programmer board.

The DIP switch and the jumper setting need to confirmed with software indication when you selected the chip type from the software.

Edited by - ZLM on 08/22/2006 11:40:46
Go to Top of Page
Reply #2

Necrosaro420

109 Posts

Posted - 02/23/2008 :  20:23:01  Show Profile  Reply with Quote
Sorry to dig up an old topic, but I am having the same issue. I have a willem pcb3, and I bought an sivava adapter of ebay ( http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=370014757919&ssPageName=STRK:MEWN:IT&ih=024 )

I set the jumpers according to willems software, and I get errors as soon as I started programming every time =(
Go to Top of Page
Reply #3

ZLM

2937 Posts

Posted - 02/25/2008 :  08:49:00  Show Profile  Reply with Quote
If programming fail on random location, the your PCB3B does not work well on M27C800, M27C160 and M27C322. This is common issue on all PCB3B.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000