MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 93c46 rotated
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

M1DJF

United Kingdom
29 Posts

Posted - 02/15/2011 :  01:46:37  Show Profile  Reply with Quote
how can read rotated 93c46 on GQ4 programmers need this info as i am waiting delivery of my new programmer from mcumall,
as at present i am using willem programmer for which I had to make leads for 93c46 rotated could anyone shade some light on this matter as I use a lot of rotaded 93c46 soics.
thank you .

If you can't do it don't screw it leave it as you find it.

Edited by - M1DJF on 02/15/2011 01:47:44
Reply #1

Bad_Ad84

210 Posts

Posted - 02/15/2011 :  04:45:06  Show Profile  Reply with Quote
Id just rewire the adapter and have one for rotated and one for normal.

I do not think the GQ-4X supports fully remapping each pin like a "professional" programmer can, therefore your adapter will need to match what the programmer expects - much like your willem programmed needed.
Go to Top of Page
Reply #2

M1DJF

United Kingdom
29 Posts

Posted - 02/16/2011 :  00:51:53  Show Profile  Reply with Quote
thank you very much for your help

quote:
Originally posted by Bad_Ad84

Id just rewire the adapter and have one for rotated and one for normal.

I do not think the GQ-4X supports fully remapping each pin like a "professional" programmer can, therefore your adapter will need to match what the programmer expects - much like your willem programmed needed.


If you can't do it don't screw it leave it as you find it.
Go to Top of Page
Reply #3

benaknoun

Spain
133 Posts

Posted - 02/22/2011 :  15:25:27  Show Profile  Reply with Quote
Hi, i also have GQ-4X and i am trying to read 93c46 rotated, can someone help me please? do i need to change the pin connections on the adapter?


Thanks in advance
Go to Top of Page
Reply #4

benaknoun

Spain
133 Posts

Posted - 02/22/2011 :  15:35:44  Show Profile  Reply with Quote
Hi, i also have GQ-4X and i am trying to read 93c46 rotated, can someone help me please? do i need to change the pin connections on the adapter?


Thanks in advance
Go to Top of Page
Reply #5

M1DJF

United Kingdom
29 Posts

Posted - 04/27/2011 :  23:59:33  Show Profile  Reply with Quote
here mate look at this curcuit diagram and you can make test clip which you can use with your programmer THE ONLY THING IS SOME OF THIS HAVE ROTATED PINS.
www.datasheetcatalog.org/datasheets/480/46331_DS.pdf" target="_blank">h p://www.datasheetcatalog.org/datasheets/480/46331_DS.pdf

If you can't do it don't screw it leave it as you find it.

Edited by - M1DJF on 04/28/2011 00:02:15
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.07 sec. Snitz Forums 2000