MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 TOP USB Programmer
 PAL reading or writing problem with Top products
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

marquino

Italy
17 Posts

Posted - 10/20/2006 :  08:15:01  Show Profile  Reply with Quote
Hello everyone !!
I have a Top2005 programmer with no problem on eprom/eeprom or flash neither with sram or ic test but with pal gal or pld devices like you call this ones, i have encountered some problems.
In particular, when i select pld devices in the type menu, after done the operations the software don't exit, it return "access violation error".
Another thing that happen is that i have many GAL16V8 and GAL22V10 manufactured by National Semicond but my programmer do not erase/write or read it.
I have also many PALCE16V8 and PALCE22V10 but i'm not sure for the exact compatibility with GAL (also if on the datasheet they say is the same like GAL).
Why ZLM don't answer me ?????
I'm the only with this problem ?????
Pls someone who's answer at this question !!!!!
Reply #1

marquino

Italy
17 Posts

Posted - 10/21/2006 :  05:14:41  Show Profile  Reply with Quote
For the use of everyone :
i've found the right mode to handle GAL16V8 made by NS, you must to select Manufacturer VLSI type VP16V8,
ZLM or who's for you tell us why this happen !!!
By now no success with GAL22V10 or PALCE series.
Why when i select a device the programmer "feel" if they are in place or not, instead whe in select 22v10 it don't feel nothing ????????????
There is a technical support for this chinese product ??
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000