MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 mx29lv160btc-90		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

tahir

United Kingdom
45 Posts
Posted - 01/23/2012 :  05:00:09  Show Profile  Reply with Quote
hi could anyone tell me the offset adress for the mx29lv160cbt-90 plz to burn the chip thanks thanks
t.hussain
Reply #1

ZLM

2937 Posts
Posted - 01/23/2012 :  14:17:01  Show Profile  Reply with Quote
The offset address is based on your data file and application.

Most of cases you do not need to set the offset. Just keep it 0. Unless you used data file is not a direct chips data image.
Go to Top of Page
Reply #2

ZLM

2937 Posts
Posted - 01/26/2012 :  09:46:52  Show Profile  Reply with Quote
At least the programmer should be able to detect the chip correctly. If not then something must be wrong like chip orientation, contact etc.
Go to Top of Page
Reply #3

ZLM

2937 Posts
Posted - 01/27/2012 :  23:29:18  Show Profile  Reply with Quote
bad chip?
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000