MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 Dump a Harris 7641?
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

traderone

3 Posts

Posted - 10/03/2012 :  03:59:36  Show Profile  Reply with Quote
Sent this note to support but received no reply. I have a GQ-4X and want to dump the contents of a Harris 7641 bipolar PROM (24 pin DIP 512x8, 4K.) Equivalents are Signetics 82S141 and National 74S474. I don't want to burn these PROMs just want to get the contents out of the existing PROMs. Anyone know if this is possible with the 4X or would I need something different to get the data out of these things? TIA!

traderone
Reply #1

ZLM

2937 Posts

Posted - 10/10/2012 :  20:19:53  Show Profile  Reply with Quote
This chip is not supported with current software and hardware.
Go to Top of Page
Reply #2

traderone

3 Posts

Posted - 10/11/2012 :  06:46:42  Show Profile  Reply with Quote
Thanks for the response. So I assume this is not possible even with an adapter and a unique profile for the chip for read-only? Again thanks in advance for your response.

traderone
Go to Top of Page
Reply #3

Bad_Ad84

210 Posts

Posted - 10/12/2012 :  05:01:35  Show Profile  Reply with Quote
If you just need it reading and cant find a way to do it. You can send me the chip and I will email you the contents.
Go to Top of Page
Reply #4

traderone

3 Posts

Posted - 10/13/2012 :  01:38:00  Show Profile  Reply with Quote
Email sent - thanks!

traderone
Go to Top of Page
Reply #5

RobedDude

USA
1 Posts

Posted - 08/30/2022 :  09:18:11  Show Profile  Reply with Quote
10 years since OP posed the question and I have the same exact issue. Any movement on this? Is there a way I can add this device to the list or tweak things to get the 4x v4 to read it? Such a similar pinout to 2716 EPROMs it's a shame these haven't found their way in yet. Aside from the Sig 82S141 and Nat'l 74S74, the Harris 7641 also crosses to TI 28S46, Intel 3624, and AMD 27S31. These ROMs were commonplace in Williams arcade machines of the 70s- early 80s.
Go to Top of Page
Reply #6

goliath74

USA
1 Posts

Posted - 10/12/2022 :  07:56:28  Show Profile  Reply with Quote
Hi RobedDude...I'm in the same predicament. Looking to check the decoder chips on a couple williams boards and was hoping I could use the 4x4 to verify if they were good. Count this as a vote to add this chip :)


Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000