MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 I can not read 35P08
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Pablo Labrune

Argentina
8 Posts

Posted - 04/24/2015 :  07:34:26  Show Profile  Reply with Quote
hello I need to read this report but do not make it have a GQ-4X v6.3. I appreciate your help

Edited by - Pablo Labrune on 04/24/2015 10:35:01
Reply #1

ZLM

2937 Posts

Posted - 04/24/2015 :  17:54:05  Show Profile  Reply with Quote
What is your error message?
Go to Top of Page
Reply #2

Pablo Labrune

Argentina
8 Posts

Posted - 05/01/2015 :  08:09:24  Show Profile  Reply with Quote
ZLM Hello my problem is that I want to read the memory and shows FF. The memory works because I put in the ecu and works well. I read it to modify the data to off immobilizer.
Yesterday I wanted to read a memory 95040 and also. Reading gives FF
You uninstall the program and returned to install it but without results.
I have two Gq-X4 and do the same so dismiss the programmer
Go to Top of Page
Reply #3

Pablo Labrune

Argentina
8 Posts

Posted - 05/02/2015 :  15:52:21  Show Profile  Reply with Quote
ZLM Hello, I have a question, note that when I test voltage, the controller stops responding. I tested connecting an external source and properly run the test voltage.
Could this be the problem you can not read the memory?
Go to Top of Page
Reply #4

ZLM

2937 Posts

Posted - 05/04/2015 :  19:24:20  Show Profile  Reply with Quote
You do not need the external power source for those chips.

Try to read those chips with USB connection only.

Make sure your adapter OR connection have no problem.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000