MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 gq-4x support for S25FL064P 16pin
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

BackON

6 Posts

Posted - 10/14/2015 :  10:12:22  Show Profile  Reply with Quote
hello

how i can read this chip with GQ-4x? Thanks
Reply #1

ZLM

2937 Posts

Posted - 10/14/2015 :  10:25:50  Show Profile  Reply with Quote
Add following line:

Name="S25FL064*SOIC16 ",ID="010216",Class="W25X10",Category="SERIAL_EPROM",MFG="Spansion",Vcc="3.6V",CodeSize="8388608",Adapter="ADP-098 adapter";
Go to Top of Page
Reply #2

BackON

6 Posts

Posted - 10/24/2015 :  13:31:43  Show Profile  Reply with Quote
the adp-098 its necesary? because im tryong to read the chip with pomona 5252 and pinned to thre programmer but doesnt read anything


thanks
Go to Top of Page
Reply #3

ZLM

2937 Posts

Posted - 10/27/2015 :  13:14:21  Show Profile  Reply with Quote
If the wires too long, it does not read the chip correctly.

Try to use shortest wires between the programmer ZIF and your chip. The shorter the better. The SPI uses high frequency communication protocol, so it is very sensitive to the length of wires.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.11 sec. Snitz Forums 2000