MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 GQ-4X software hanged
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

1Armadillo

3 Posts

Posted - 03/31/2017 :  10:23:52  Show Profile  Reply with Quote
I had just recently bought the GQ4X eprom burner.

I inserted a M2764A eprom and pressed ID then the software is hanged and nothing can be done to recover it. Unplug the usb and the software begin to initialize, say its updated and USB connection lost. Plug in the usb and it hang the software again. Seems like the software is waiting for some response from the burner.
I took out the eprom, plug out the usb. Restart the computer and it’s still the same. I reinstalled the software, reinstall the USB drivers but the result is the same. It looks like the eprom usb is dead. Any advise; thanks


Download Attachment:
Reply #1

anniel

2531 Posts

Posted - 03/31/2017 :  11:46:29  Show Profile  Reply with Quote
Try external power.
Go to Top of Page
Reply #2

1Armadillo

3 Posts

Posted - 03/31/2017 :  13:11:34  Show Profile  Reply with Quote
I have tried, external 9v @1A power supply, but still the same. :-(

Edited by - 1Armadillo on 03/31/2017 13:12:58
Go to Top of Page
Reply #3

anniel

2531 Posts

Posted - 03/31/2017 :  13:22:20  Show Profile  Reply with Quote
Probably a bad chip, did you try another one?
Go to Top of Page
Reply #4

1Armadillo

3 Posts

Posted - 03/31/2017 :  13:27:39  Show Profile  Reply with Quote
The software window is hanged in initialization when the USB is plug in without any chip. I cannot minimize the windows even. I cannot pressed any buttons or activate the menu. When I plug out the usb, then it will complete the initialization and say sync lost etc... When I plug in the usb, the cycle is repeated, it hanged the window of the burner. Other windows not related to the burner is OK.
Go to Top of Page
Reply #5

anniel

2531 Posts

Posted - 03/31/2017 :  14:04:59  Show Profile  Reply with Quote
Ok, I miss understood. Maybe your GQ-4X is damaged? Try support@mcumall.com
Go to Top of Page
Reply #6

nbdey

6 Posts

Posted - 04/18/2017 :  00:16:40  Show Profile  Reply with Quote
Had the same problem.
First used some years GQ3X but it gave me more and more problems.
So bought GQ4X and installed soft.
First start was okay, but next start nothing.

Removed drivers, Software and reinstalled everything-> No chance.

Took my second laptop (were no GQ Software was installed before) installed Software there, and it works now.
Go to Top of Page
Reply #7

anniel

2531 Posts

Posted - 04/18/2017 :  04:25:11  Show Profile  Reply with Quote
What OS on your laptops?
Go to Top of Page
Reply #8

fusioncliffs

3 Posts

Posted - 11/21/2017 :  08:38:39  Show Profile  Reply with Quote
I had a recent issue with an Intel 2764A it would read only "FF" data and would not verify. After much trial and error I found out the Toshiba TMM2764A protocol works perfectly !
Go to Top of Page
Reply #9

anniel

2531 Posts

Posted - 11/21/2017 :  09:02:48  Show Profile  Reply with Quote
quote:
Originally posted by fusioncliffs

I had a recent issue with an Intel 2764A it would read only "FF" data and would not verify. After much trial and error I found out the Toshiba TMM2764A protocol works perfectly !



Thank you for the info fusioncliffs.
The only difference is WVCC="6.2V".
Go to Top of Page
Reply #10

elbronco

Argentina
26 Posts

Posted - 01/06/2018 :  05:25:14  Show Profile  Reply with Quote
Hola 1Armadillo tengo un problema similar. Al conectar el cable USB se cuelga el programa.
Alguna solucion?
Go to Top of Page
Reply #11

anniel

2531 Posts

Posted - 01/06/2018 :  05:48:11  Show Profile  Reply with Quote
quote:
Originally posted by elbronco

Hola 1Armadillo tengo un problema similar. Al conectar el cable USB se cuelga el programa.
Alguna solucion?



¿Probaste esto?

http://www.mcumall.com/forum/topic.asp?TOPIC_ID=7054
Go to Top of Page
Reply #12

elbronco

Argentina
26 Posts

Posted - 01/06/2018 :  12:48:23  Show Profile  Reply with Quote
If I did it and even then it's fine. The problem is when I connect it to the USB and the software hangs up. I'm in a hurry to know what the problem is, if it's the programmer I give it back.
Go to Top of Page
Reply #13

anniel

2531 Posts

Posted - 01/13/2018 :  05:59:51  Show Profile  Reply with Quote
quote:
Originally posted by elbronco

If I did it and even then it's fine. The problem is when I connect it to the USB and the software hangs up. I'm in a hurry to know what the problem is, if it's the programmer I give it back.



Where did you get your programmer?
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.11 sec. Snitz Forums 2000