MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 General Discuss
 How to maintain the electronic module?
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

kityorWilson

USA
25 Posts

Posted - 08/13/2018 :  19:48:51  Show Profile  Reply with Quote
How to maintain the electronic module? Our machine's electronic module is easily damaged, so we want to know how to do better to maintain this electronic module?

To be or not to be.That is a question.
Reply #1

anniel

2529 Posts

Posted - 08/14/2018 :  05:36:47  Show Profile  Reply with Quote
quote:
Originally posted by kityorWilson

How to maintain the electronic module? Our machine's electronic module is easily damaged, so we want to know how to do better to maintain this electronic module?



You would be better off ruggedizing your module than maintain it if it's so fragile.

What is your machine's make and model? Module part number? Damage encountered?
Go to Top of Page
Reply #2

anniel

2529 Posts

Posted - 08/16/2018 :  05:49:06  Show Profile  Reply with Quote
quote:
Originally posted by kityorWilson

How to maintain the electronic module? Our machine's electronic module is easily damaged, so we want to know how to do better to maintain this electronic module?



You could also try to stop buying Chinese junk and use high quality parts.
Go to Top of Page
Reply #3

anniel

2529 Posts

Posted - 10/11/2019 :  03:17:45  Show Profile  Reply with Quote
quote:
Originally posted by kityorWilson

How to maintain the electronic module? Our machine's electronic module is easily damaged, so we want to know how to do better to maintain this electronic module?

Did you ever get better quality modules for your machine?
Go to Top of Page
Reply #4

change888

1 Posts

Posted - 06/12/2022 :  22:31:30  Show Profile  Reply with Quote
quote:
Originally posted by kityorWilson

How to maintain the electronic module? Our machine's electronic module is easily damaged, so we want to know how to do better to maintain this electronic module?



1. Cleaning
The first thing that needs to be done is cleaning the module. You should use alcohol wipes to clean off any dirt or dust from the surface. Make sure to wipe down the inside too. If you have a case, make sure to remove it before wiping down the module. After cleaning, let the module dry completely.
2. Heat
You can heat the module using a hair drier or blow dryer. Be careful not to overheat the module. You want to keep the temperature around 140 degrees Fahrenheit (60 degrees Celsius). This will help prevent damage to the module.
3. Humidity
Make sure to keep the humidity at about 50 percent. This will help prevent moisture build-up inside the module.

Edited by - anniel on 06/13/2022 03:10:10
Go to Top of Page
Reply #5

anniel

2529 Posts

Posted - 06/13/2022 :  03:11:39  Show Profile  Reply with Quote
quote:
Originally posted by change888

quote:
Originally posted by kityorWilson

How to maintain the electronic module? Our machine's electronic module is easily damaged, so we want to know how to do better to maintain this electronic module?



1. Cleaning
The first thing that needs to be done is cleaning the module. You should use alcohol wipes to clean off any dirt or dust from the surface. Make sure to wipe down the inside too. If you have a case, make sure to remove it before wiping down the module. After cleaning, let the module dry completely.
2. Heat
You can heat the module using a hair drier or blow dryer. Be careful not to overheat the module. You want to keep the temperature around 140 degrees Fahrenheit (60 degrees Celsius). This will help prevent damage to the module.
3. Humidity
Make sure to keep the humidity at about 50 percent. This will help prevent moisture build-up inside the module.


Good advice.
Go to Top of Page
Reply #6

JoshuaBryant

Australia
2 Posts

Posted - 12/02/2022 :  15:05:12  Show Profile  Reply with Quote
Thanks for the humble advice and tips for us.
quote:
Originally posted by change888

quote:
Originally posted by kityorWilson

How to maintain the electronic module? Our machine's electronic module is easily damaged, so we want to know how to do better to maintain this electronic module?



1. Cleaning
The first thing that needs to be done is cleaning the module. You should use alcohol wipes to clean off any dirt or dust from the surface. Make sure to wipe down the inside too. If you have a case, make sure to remove it before wiping down the module. After cleaning, let the module dry completely.
2. Heat
You can heat the module using a hair drier or blow dryer. Be careful not to overheat the module. You want to keep the temperature around 140 degrees Fahrenheit (60 degrees Celsius). This will help prevent damage to the module.
3. Humidity
Make sure to keep the humidity at about 50 percent. This will help prevent moisture build-up inside the module.

Go to Top of Page
Reply #7

anniel

2529 Posts

Posted - 12/03/2022 :  09:41:15  Show Profile  Reply with Quote
quote:
Originally posted by JoshuaBryant

Thanks for the humble advice and tips for us.
quote:
Originally posted by change888

quote:
Originally posted by kityorWilson

How to maintain the electronic module? Our machine's electronic module is easily damaged, so we want to know how to do better to maintain this electronic module?



1. Cleaning
The first thing that needs to be done is cleaning the module. You should use alcohol wipes to clean off any dirt or dust from the surface. Make sure to wipe down the inside too. If you have a case, make sure to remove it before wiping down the module. After cleaning, let the module dry completely.
2. Heat
You can heat the module using a hair drier or blow dryer. Be careful not to overheat the module. You want to keep the temperature around 140 degrees Fahrenheit (60 degrees Celsius). This will help prevent damage to the module.
3. Humidity
Make sure to keep the humidity at about 50 percent. This will help prevent moisture build-up inside the module.





You're welcome.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.14 sec. Snitz Forums 2000