MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 write error gq-4x
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

75alessandro

Italy
8 Posts

Posted - 09/24/2018 :  04:25:42  Show Profile  Reply with Quote
good morning, sorry my bad english, I have some problems with the programming of some chips (27c1000 / 27c160 / 27c322). I often get the error as in the attached photo. I state that:
- before writing the chips, I always delete them
- use of win 10 (also tested with win 7 but without any improvement)
- latest software version 7.21
- I also tried with a new programmer but with no results
do you have any idea ???



Image Insert:

161613 bytes

Image Insert:

186386 bytes
Reply #1

anniel

2531 Posts

Posted - 09/24/2018 :  15:05:03  Show Profile  Reply with Quote
quote:
Originally posted by 75alessandro

good morning, sorry my bad english, I have some problems with the programming of some chips (27c1000 / 27c160 / 27c322). I often get the error as in the attached photo. I state that:
- before writing the chips, I always delete them
- use of win 10 (also tested with win 7 but without any improvement)
- latest software version 7.21
- I also tried with a new programmer but with no results
do you have any idea ???



Image Insert:

161613 bytes

Image Insert:

186386 bytes



Does the chip ID correctly?
Go to Top of Page
Reply #2

75alessandro

Italy
8 Posts

Posted - 09/24/2018 :  20:47:45  Show Profile  Reply with Quote
The chip ID does not detect me. I do not know if it is normal or not, the example above is with the 27c1000 but it does me the same with the 27c160 and 27c322 (mounted with adapter).
Go to Top of Page
Reply #3

75alessandro

Italy
8 Posts

Posted - 09/25/2018 :  05:06:18  Show Profile  Reply with Quote
ID device (for 27c1000/27c322/27c160) function not supported!
Go to Top of Page
Reply #4

anniel

2531 Posts

Posted - 09/25/2018 :  05:37:14  Show Profile  Reply with Quote
quote:
Originally posted by 75alessandro

ID device (for 27c1000/27c322/27c160) function not supported!




ID should work for the 27C1000.
Go to Top of Page
Reply #5

75alessandro

Italy
8 Posts

Posted - 09/25/2018 :  07:53:58  Show Profile  Reply with Quote
with 27c1000 not working ..... I have exhausted my ideas ....

Image Insert:

156462 bytes
Go to Top of Page
Reply #6

anniel

2531 Posts

Posted - 09/27/2018 :  14:12:15  Show Profile  Reply with Quote
quote:
Originally posted by 75alessandro

with 27c1000 not working ..... I have exhausted my ideas ....

Image Insert:

156462 bytes




Select 27C1000 not M27C1000 and try again.
Go to Top of Page
Reply #7

75alessandro

Italy
8 Posts

Posted - 09/28/2018 :  04:41:15  Show Profile  Reply with Quote
tried, unfortunately, nothing changes. I have exhausted all my ideas
Go to Top of Page
Reply #8

anniel

2531 Posts

Posted - 09/28/2018 :  08:09:53  Show Profile  Reply with Quote
quote:
Originally posted by 75alessandro

tried, unfortunately, nothing changes. I have exhausted all my ideas




Is this with a "new" chip or a chip pulled out of a working system?
Go to Top of Page
Reply #9

75alessandro

Italy
8 Posts

Posted - 09/28/2018 :  14:46:22  Show Profile  Reply with Quote
new chip!
Go to Top of Page
Reply #10

anniel

2531 Posts

Posted - 09/28/2018 :  17:30:38  Show Profile  Reply with Quote
quote:
Originally posted by 75alessandro

new chip!




Your 27C1000 is probably a bad or fake chip if you can't ID it.
Go to Top of Page
Reply #11

ZLM

2937 Posts

Posted - 10/06/2018 :  11:51:51  Show Profile  Reply with Quote
Can you take a picture of adapter? Backside too?
Go to Top of Page
Reply #12

75alessandro

Italy
8 Posts

Posted - 10/07/2018 :  05:29:07  Show Profile  Reply with Quote
I do not think it is an adapter problem, with the 27c1000 without adapter gives me the same type of error that gives me with the 27c160 / 27c322 with adapter

Image Insert:

204380 bytes

Image Insert:

174941 bytes
Go to Top of Page
Reply #13

ZLM

2937 Posts

Posted - 10/07/2018 :  07:17:41  Show Profile  Reply with Quote
Sorry. The M27C1000 does not need adapter.

Your adapter looks is not in a good condition.

Have you ever programmed 27C1000 on this programmer successfully?

The software has no problem since it has been tested on this chip.

The M27C1000 is compatible with 27C301.

Make sure your chips are good if you bought the chip from eBay.

Go to Top of Page
Reply #14

anniel

2531 Posts

Posted - 10/07/2018 :  14:32:48  Show Profile  Reply with Quote
quote:
Originally posted by 75alessandro

I do not think it is an adapter problem, with the 27c1000 without adapter gives me the same type of error that gives me with the 27c160 / 27c322 with adapter

Image Insert:

204380 bytes

Image Insert:

174941 bytes




Soldering doesn't look so good.
Go to Top of Page
Reply #15

ZLM

2937 Posts

Posted - 10/07/2018 :  16:53:58  Show Profile  Reply with Quote
If possible buy the latest version adapter ADP-054 V4.1. That works more stable.
Go to Top of Page
Reply #16

75alessandro

Italy
8 Posts

Posted - 10/07/2018 :  23:43:29  Show Profile  Reply with Quote
but the problem is before the adapter; to write the 27c1000 I do not need the adapter. sometimes he writes to me, sometimes not. I tried to buy 27c1000 / 27c160 / 27c322 from another supplier; excluding the programmer (tested with a new gq-4x, but the problem remains), usb cable, may be: bad chips or some error due to the operating system / software (win 10 + usbprog 7.21 + driver 3.0) or some incorrect setting of the program when writing.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.11 sec. Snitz Forums 2000