USB Interfaced Ultra-Fast 144pin Stand-Alone Universal Programmer

Features

• Support devices with Vcc from 1.2V - 5V.
• 30% faster programming speed compared to SuperPro 5000 with ARM9 MCU Processor + Linux ultra-fast algorithm processing engine.
• Support files up to 256 GBytes.
• Built with 144 universal pin-drivers. Universal adapters are available for various package types up to 144 pins. More efficient for new device support.  
• Stand-alone mode (No PC required) and PC hosted mode.
  • Under PC hosted mode the programmer is controlled by a PC via USB2.0 (high speed) to program a chip. 
  • Under stand-alone mode, the programmer is controlled via the 6-KEY keypad and the 20 character by 4 line LCD display. 
  • A CF (compact flash) card is used to store the project files.  
• Cluster 1-15 units for flexible volume production. Operate multiple units to construct a concurrent multi-programming system. 
• ISP / ICP programming capability available via ISP / ICP adapter.
• Over-current and over-voltage protection for safety of the chip and programmer hardware.
• Compatible with Windows XP / Vista / 7 / 8 (32/64 bit)
• Only IC manufacturer approved programming algorithms used for high reliability.
• Vcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability.
• Advanced and powerful software functions:
  • Production mode start chip operation the moment the chip is inserted properly. 
  • Project function simplifies processes such as Device Selection, File Loading, Device Configuration Setting, Program Option, and Batch File Setting into one step.
  • Password for project files can be set for volume production control
  • Batch command combines device operations like Program, Verify,and Security into a single command at any sequence.
  • Serial numbers generators are available as standard or customer-specific functions.
Log file is useful for quality tracking.

• Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU
• Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP
• PC interface: USB2.0 (High speed)
• Stand-alone memory: Compact FLASH Card
• Power supply: AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A
• Main unit: Dimensions 148(L) * 216(W) * 94(h) mm; Weight 3.5 lbs (1.6 Kg)
• Package: Dimensions 301(L) * 252(W) * 145(H) mm; Weight 6.2 lbs (2.8Kg)

• SuperPro 6000 Programmer with a DIP48 Adapter
• AC adapter
• Software CD
• USB Cable