| T O P I C R E V I E W |
| Seiz |
Posted - 05/03/2015 : 20:48:54
Hello everyone,
Here , I have a GQ -3x programmer who was working perfectly until yesterday (except an encoding problem reading but not blocking) .
Since yesterday, my programmer does not detect the EPROM .
Indeed, despite a complete re- installation on 2 different computers with different EPROM , I can no longer detect the ID chip .
I continually FFFF as ID .
Like that :
My programmer is it out of service ?
The green LED is on, the programmer is detected, it turns red and orange when I clik on "ID" , but nothing more ....
Please help me I need it quickly.
Thank you a lot.
Seiz |
| 2 L A T E S T R E P L I E S (Newest First) |
| Seiz |
Posted - 05/11/2015 : 07:42:27
Hello,
Thanks for reply. 
I've try with many different chip (new and old, 29F200 or 29F400 but it's same problem)
All contact are good. Before, if a contact was bad, software autofind a bad DEVICE bt here, he find nothing.
It's possible to reset or update firmware ? |
| ZLM |
Posted - 05/04/2015 : 19:17:11
Try to read the chip and see if the reading is OK.
Also confirm the chip is good and with good contacting with adapter.
Change to another chip and try. |
|
|
