T O P I C R E V I E W |
ttteee |
Posted - 03/09/2009 : 14:30:58 received today my gq-4x after a couple of problems I mangaed to set it up and tried to play around with a HN27C4096G-12
a) the picture says adapter needed, but the eprom is 40 pin and fits the programmer, why?
b) can't do anything except reading, it's because it's not well erased? |
2 L A T E S T R E P L I E S (Newest First) |
ttteee |
Posted - 03/10/2009 : 11:15:20 ok, sigh, if I knew I would have included it in the same shipping :( |
ZLM |
Posted - 03/09/2009 : 18:37:54 a), The 27C4096 needs 16 bit EPROM adapter. The GQ-4X is Willem family programmer, so it ueses Willem adapters. b), The reading is not correct without a correct adapter.
So, one of the following adapter is needed: http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=4290
OR
http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=4289
|
|
|