MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 GQ-4X and ADP-054 no longer working

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:
UserName:
Password:
Format Mode:
Format: BoldItalicizedUnderlineStrikethrough Align LeftCenteredAlign Right Horizontal Rule Insert HyperlinkInsert EmailInsert Image Insert CodeInsert QuoteInsert List Spell Checker
   
Message:

* HTML is OFF
* Forum Code is ON
Smilies
Smile [:)] Big Smile [:D] Cool [8D] Blush [:I]
Tongue [:P] Evil [):] Wink [;)] Clown [:o)]
Black Eye [B)] Eight Ball [8] Frown [:(] Shy [8)]
Shocked [:0] Angry [:(!] Dead [xx(] Sleepy [|)]
Kisses [:X] Approve [^] Disapprove [V] Question [?]

   Insert an Image File
Check here to include your profile signature.
    

T O P I C    R E V I E W
sammargh Posted - 03/19/2018 : 16:03:48
My ADP-054 was working fine earlier today however now it refuses to get past 3% on 27C400 it's always the same address and the write is off by 8. I am using a power supply with the GQ-4X and as stated it worked earlier today, I was able to program about 24 chips without issue. Blank checking works fine but writing does not.

Some examples:
Chip is blank
ID check skipped
Writing... Buffer
Elapsed time: 2.34 seconds.
Write failed, Address=0x00402D, Buffer=0xEB Device=0xE3
Write failed

And with a smaller chip - HN27C4096

Write failed, Address=0x00000B, Buffer=0x88 Device=0x80
Write failed
Different file but HN27C4096
Write failed, Address=0x000003, Buffer=0x0B Device=0x03
Write failed


I know it isn't the chips because I tried almost 20 different 27C400 and all failed at the same exact address writing after passing a blank check. I was able to program the HN27C4096 with my cheap chinese TL866 fine.

Any ideas what may be going on? J1 is set to the first position.
1   L A T E S T    R E P L I E S    (Newest First)
anniel Posted - 03/21/2018 : 04:18:11
quote:
Originally posted by sammargh

My ADP-054 was working fine earlier today however now it refuses to get past 3% on 27C400 it's always the same address and the write is off by 8. I am using a power supply with the GQ-4X and as stated it worked earlier today, I was able to program about 24 chips without issue. Blank checking works fine but writing does not.

Some examples:
Chip is blank
ID check skipped
Writing... Buffer
Elapsed time: 2.34 seconds.
Write failed, Address=0x00402D, Buffer=0xEB Device=0xE3
Write failed

And with a smaller chip - HN27C4096

Write failed, Address=0x00000B, Buffer=0x88 Device=0x80
Write failed
Different file but HN27C4096
Write failed, Address=0x000003, Buffer=0x0B Device=0x03
Write failed


I know it isn't the chips because I tried almost 20 different 27C400 and all failed at the same exact address writing after passing a blank check. I was able to program the HN27C4096 with my cheap chinese TL866 fine.

Any ideas what may be going on? J1 is set to the first position.




Defective or dirty socket?

MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.05 sec. Snitz Forums 2000