T O P I C R E V I E W |
Seer |
Posted - 09/05/2019 : 04:38:54 I have seen a few posts about this burner but i have tried several things and cannot get the burner to do a blank check it fails. I am able to read the original chip but when I try to burn it this comes up: Write Failed, Address=0x000001, Buffer=0xFD Device=0x1C This is the same error when trying to verify it is blank as well. The last burner I used was 20 years ago and called a Gangpro 8 but this seemed to be a good way to program 42 pin eproms |
3 L A T E S T R E P L I E S (Newest First) |
anniel |
Posted - 09/06/2019 : 14:19:39 quote: Originally posted by Seer
Yes I ran 4 of them through the eraser
Are you certain they are good? |
Seer |
Posted - 09/06/2019 : 13:41:42 Yes I ran 4 of them through the eraser |
anniel |
Posted - 09/05/2019 : 13:40:19 quote: Originally posted by Seer
I have seen a few posts about this burner but i have tried several things and cannot get the burner to do a blank check it fails. I am able to read the original chip but when I try to burn it this comes up: Write Failed, Address=0x000001, Buffer=0xFD Device=0x1C This is the same error when trying to verify it is blank as well. The last burner I used was 20 years ago and called a Gangpro 8 but this seemed to be a good way to program 42 pin eproms
Are you certain your device is blank? |