T O P I C R E V I E W |
SteveM |
Posted - 10/11/2007 : 21:29:50 I've read some smaller EPROMs on my Dual Power without problem. I'm trying to read a 4mbit EPROM using the 16 bit adapter. There's absolutely no documentation I can find anywhere about using the 16bit adapter. I assume I have it oriented properly, I have the jumpers set to "normal" and I have the DIP switches set to what the software tells me. The other window where it usually displays the picture just says "Require adapter" and that's all. What am I missing here? Thanks. |
3 L A T E S T R E P L I E S (Newest First) |
ZLM |
Posted - 10/14/2007 : 08:01:56 For this chip there are no extra jumper and cable on adapter setting are needed. |
SteveM |
Posted - 10/13/2007 : 00:09:54 It's a 27C4096. The only instructions on the adapter are for the jumper. Nothing tells me about any other jumpers or orientation. |
ZLM |
Posted - 10/12/2007 : 10:23:42 Most of instructions are printed on the adapter. What is the exact your EPROM part number? |