| T O P I C R E V I E W |
| busdriver |
Posted - 03/31/2009 : 10:45:17
I have an emp-21 programmer from Needham's electronics that was discontinued a few years ago. I am trying to program an Intel E28F640J3A TSOP56, but don't have the adapter E21-TSOP56-J3 and there is no information available anywhere to determine the pin connections to build the adapter nor anywhere to buy one. Does anyone know if there is a way to determine the pinout for this universal programmer (ex: pin 1 = A1, etc) or would anyone have one of these adapters laying around that could send me the pin configuration? I really appreciate any help or information you can find.
Thanks in advance for your help! |
| 5 L A T E S T R E P L I E S (Newest First) |
| busdriver |
Posted - 04/12/2009 : 05:20:06
If someone knows how to test the pins on a universal programmer to determine which signal is present, that would be a great start. Adapters could be easily and cheaply built when data is not available for any programmer. I've taken voltage readings on each pin of my emp-21, but can't seem to find a usable pattern. |
| ZLM |
Posted - 04/02/2009 : 18:16:17
I think the MCUmall should consider to design a TSOP56 adapter on GQ-4X. It should cover Intel E28F160, E28F320, E28F640. |
| busdriver |
Posted - 04/02/2009 : 10:35:53
I would love to make one myself, but I just can't find the information. Hopefully someone who sees this will have one laying around to get the pinout or know how I can test the programmer. I'm even trying to figure how to reverse the encrypted dll file.  |
| yelenavik |
Posted - 03/31/2009 : 12:20:08
I could be make yourself but need schematic jumpers,no information ,because company missing. |
| yelenavik |
Posted - 03/31/2009 : 12:16:56
I have same problem with EMP-11.i have only 111 a-b adapter for plcc32,but cant buy separate 112-114 family.programmer very good proffecional. |
