MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Using The Enhanced/Dual power Willem Programmer
 DIP32 to PLCC32 adapter on an enhanced willem prog

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:
UserName:
Password:
Format Mode:
Format: BoldItalicizedUnderlineStrikethrough Align LeftCenteredAlign Right Horizontal Rule Insert HyperlinkInsert EmailInsert Image Insert CodeInsert QuoteInsert List Spell Checker
   
Message:

* HTML is OFF
* Forum Code is ON
Smilies
Smile [:)] Big Smile [:D] Cool [8D] Blush [:I]
Tongue [:P] Evil [):] Wink [;)] Clown [:o)]
Black Eye [B)] Eight Ball [8] Frown [:(] Shy [8)]
Shocked [:0] Angry [:(!] Dead [xx(] Sleepy [|)]
Kisses [:X] Approve [^] Disapprove [V] Question [?]

   Insert an Image File
Check here to include your profile signature.
    

T O P I C    R E V I E W
stickman Posted - 01/13/2005 : 14:03:53
For a really special reason I need to program a SST39SF040 in a DIP32 to PLCC32 adapter on the enhanced willem programmer. This would mean I'm purposely not using the plcc32 socket on the board. Can anyone tell me how to do this?

I can program with the SST39SF040 in the socket on the board, but I cannot program with the SST39SF040 in the DIP32 to PLCC32 adapter. I think this is because those switches on the board need to be set differently than the Eprom3 program tells me (because it sees the enhanced board and assumes I'll just be using the socket soldered onto the board to program that chip).

I imagine (if it is just a matter of switching the switches) the switches combination I'm looking for might be what the Eprom3 program would say with the SST39SF040 selected and the pc connected to a normal (not enhanced) willem programmer without the slots. This is just a guess though.
1   L A T E S T    R E P L I E S    (Newest First)
usb Posted - 01/14/2005 : 12:43:40
When you using the PLCC32-DIP32 adapter, the programmer is working like to program a DIP32 chip.

You can use the adapter as normal. No setting is needed. All setting should be same as the setting when you using on-board PLCC32 socket or DIP32 chip.

Please check the contacting of the adapter. It most likely the problem came from the adapter.

MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.33 sec. Snitz Forums 2000