| T O P I C R E V I E W |
| K0PFX |
Posted - 02/26/2014 : 08:24:58
Is there a way to display the hex data? I can "read" the data into a buffer and now I want to display it so I can "see" the hex data info. I have an old UNIPRO programmer which allows me to do this, but do not find command for this GQ-4X that will do the same.
Thanks
Mel |
| 4 L A T E S T R E P L I E S (Newest First) |
| laoniu |
Posted - 05/17/2014 : 02:28:51
I have an old UNIPRO programmer which allows me to do this
______________________
|
| ZLM |
Posted - 05/07/2014 : 10:01:48
Software does not check the chip. So, it read the empty ZIF. |
| briank9803 |
Posted - 05/02/2014 : 18:17:20
quote:
Originally posted by ZLM
click on Code tab:
48.34 KB
When I do this with ver 6.29, only FF are displayed. I'm trying to read from a KNOWN good PROM and software says it Reads values but only displays FF. In fact, software says it reads WITHOUT ANY CHIP in the GQ-4X programmer. Obviously, software is not reading properly. Why? |
| ZLM |
Posted - 02/28/2014 : 19:38:38
click on Code tab:
48.34 KB |
