Note: You must be registered in order to post a reply. To register, click here. Registration is FREE!
T O P I C R E V I E W
baritonomarchetto
Posted - 10/28/2010 : 05:24:33 Hi all,
i have recently bought a GQ-4X. I have a 16K byte image and i wanna burn it on a 27256 EPROM. I know that the image must fulfill the EPROM, so, in this case, i would need a 32K image.
Googling i read that the image must be modified with an Hex Editor. The program of the GQ-4X has it, but i don't know:
A) how to double up the image (is "copy and paste" sufficient?) B) is there a way to let the programmer fulfill the EPROM authomatically?
Thanks for the help :)
1 L A T E S T R E P L I E S (Newest First)
ZLM
Posted - 10/28/2010 : 13:14:03 Yes. the copy and past will work.
The software will write all data in buffer into the chip. As long as you can see th data in the buffer.