Note: You must be registered in order to post a reply. To register, click here. Registration is FREE!
T O P I C R E V I E W
reiluke
Posted - 09/14/2006 : 22:57:44 Hi sirs,
I bought a enhanced willem programmer from mcumall heres what i did.
1. inserted my chip MX29F00-T 2. ran willem app .97ja, selected MX29F00-T as device 3. Set my DIP Position per indicated 4. I check get id it showed MATRONIX MX29F00-T so its correct 5. read the chip 100% ok, saved it to a file 6. erased the chip 100% erased, blank check 100% it said its blank 7. click on search button and click on unlock 7. loaded my rom file, clicked program 8. it stopped "ERROR at 0x01F193 Chip = 0xFF buffer = 0xC7
im sorry but i have never used a programmer before, i bought it just to reprogram my dead laptop.
any help would be appreciated
thank in advance sirs
1 L A T E S T R E P L I E S (Newest First)
reiluke
Posted - 09/15/2006 : 02:38:38 i tried the programmer with my laptop, 100% programmed my chip, now to test with my dead laptop. thanks all