Note: You must be registered in order to post a reply. To register, click here. Registration is FREE!
T O P I C R E V I E W
Posted - 09/14/2017 : 09:12:40 I am trying to program 24C16 chips and they are all blank. There is no ID Check but when I read it, its all FF. I load my .hex files and try to write it on the chip. It goes till 100% and then Verify Failed, Address: 0x000000, Device: 0xFF, Buffer= 0x02 shows up.
How do I proceed? I tried cleaning the pins, using different USB ports, reinstalling the drive and software, Has the PSU too.
Any help would be appreciated guys!
1 L A T E S T R E P L I E S (Newest First)
Posted - 09/15/2017 : 02:45:59 Did you try a lower speed?