MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X, GQ-3X, GQ-4X)
 BAW574252 with GQ-4X
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

_Alibo

Germany
7 Posts

Posted - 12/20/2020 :  10:30:18  Show Profile  Reply with Quote
Hi folk,

I have tried to program the I2C EEPROM out of a Becker car radio.
To read out the device is possible with settings of the 24C08 Device. But erase and programming isn't possible.

Has someone found the correct setting for this device?

Thanks in advance
Klaus

Edited by - _Alibo on 12/31/2020 07:31:46
Reply #1

anniel

2529 Posts

Posted - 12/20/2020 :  13:55:57  Show Profile  Reply with Quote
quote:
Originally posted by _Alibo

Hi folk,

I have tried to program the I2C EEPROM out of a Becker car radio.
To read out the device is possible with settings of the 24C08 Device. But erase and programming isn't possible.

Has someone found the correct setting for this device?

Thanks in advance
Klaus

You attempted in or out of circuit? Do you have the datasheet?
Go to Top of Page
Reply #2

_Alibo

Germany
7 Posts

Posted - 12/21/2020 :  01:38:10  Show Profile  Reply with Quote
I have attempted it out of the circuit
i havn't fount any datasheet for this circuit; it should be similar to the 85C72;
Here a link to the datasheet of the circuit: https://datasheetspdf.com/pdf-file/1246104/Microchip/85C72/1
Go to Top of Page
Reply #3

anniel

2529 Posts

Posted - 12/21/2020 :  14:30:06  Show Profile  Reply with Quote
quote:
Originally posted by _Alibo

I have attempted it out of the circuit
i havn't fount any datasheet for this circuit; it should be similar to the 85C72;
Here a link to the datasheet of the circuit: https://datasheetspdf.com/pdf-file/1246104/Microchip/85C72/1

Try this:

Name="BAW574242",ID="XXXX",Class="24C01",Category="SERIAL_EPROM",MFG="ALL(Generic)";
Go to Top of Page
Reply #4

_Alibo

Germany
7 Posts

Posted - 12/22/2020 :  02:21:18  Show Profile  Reply with Quote
when i add the parameter VCC="5V" then i can read out the EEPROM; but erase and write the device is still not possible
Go to Top of Page
Reply #5

anniel

2529 Posts

Posted - 12/22/2020 :  08:19:30  Show Profile  Reply with Quote
quote:
Originally posted by _Alibo

when i add the parameter VCC="5V" then i can read out the EEPROM; but erase and write the device is still not possible

Did you try a lower speed?
Go to Top of Page
Reply #6

_Alibo

Germany
7 Posts

Posted - 12/22/2020 :  12:15:31  Show Profile  Reply with Quote
Yes, i tried lower speeds also
Go to Top of Page
Reply #7

anniel

2529 Posts

Posted - 12/22/2020 :  13:30:10  Show Profile  Reply with Quote
quote:
Originally posted by _Alibo

Yes, i tried lower speeds also

What is the error message you get?
Go to Top of Page
Reply #8

_Alibo

Germany
7 Posts

Posted - 12/23/2020 :  01:01:08  Show Profile  Reply with Quote
I get no error message by writing. Writing ends quite normal but afterwards the compare to the original data fails: no byte in EEPROM was written.
The erasing of the chip never ends: the program shows 100% but the routine never ends. The whole program must be quit. And afterwards the chip content isn't erased.
Go to Top of Page
Reply #9

anniel

2529 Posts

Posted - 12/23/2020 :  04:47:34  Show Profile  Reply with Quote
quote:
Originally posted by _Alibo

I get no error message by writing. Writing ends quite normal but afterwards the compare to the original data fails: no byte in EEPROM was written.
The erasing of the chip never ends: the program shows 100% but the routine never ends. The whole program must be quit. And afterwards the chip content isn't erased.

Can you get an ID?
Go to Top of Page
Reply #10

_Alibo

Germany
7 Posts

Posted - 12/23/2020 :  08:58:45  Show Profile  Reply with Quote
i get an error message: this function is not supported by this device
Go to Top of Page
Reply #11

_Alibo

Germany
7 Posts

Posted - 12/31/2020 :  07:34:15  Show Profile  Reply with Quote
I have corrected the circuit name to BAW574252
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.52 sec. Snitz Forums 2000