MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Using the AVR JTAG ICE and AVRISP ISP programmer
 can't connect to the AVRISP MK||
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

star90

2 Posts

Posted - 07/17/2008 :  05:20:01  Show Profile  Reply with Quote
Hi,
1)I received the AVRISP MK|| and I see it at COM4.
When I press the CON button I choose the AVRISP|| and the only available port option is USB.
How do I connect to the AVRISP MK||?
2)Can I update the firmaware?
I am using Avr studio 4.14
Thanks.
Reply #1

star90

2 Posts

Posted - 07/17/2008 :  05:34:02  Show Profile  Reply with Quote
If I try connecting with the USB option it opens a new window: stk500D||: "Please select a device from the devicelist"
Go to Top of Page
Reply #2

ZLM

2937 Posts

Posted - 07/17/2008 :  14:22:36  Show Profile  Reply with Quote
Use "DebugWIRE ICE+AVRISP MKII programmer 2-in1 "

USE IT AS AVRISP MKII:
========================
1. Run AVR Studio 4 and click on CONNECT icon
2. Select JTAGICE mkII and select comport from the port list. Make sure your comport number is correct. To check the comport number assigned in the computer system manager in the control panel.
3.Once you click the Connect button, you will get into the JTAG ICE MKII programming window. In the window, set programming mode to ISP Mode.
4.Select device type. You will be able to program the device.
Go to Top of Page
Reply #3

ZLM

2937 Posts

Posted - 07/17/2008 :  21:19:05  Show Profile  Reply with Quote
You can check the programmer without connecting to a target.

You do not need to upgrade the firmware. If you already did upgrade, please make sure you copied the upgrade data file from the CD to your hard disk. Follow the user guide for the instructions.

AVR studio 4.14. will be fine.

Once connected the programmer, the blue LED should be flashing. If not, you need to upgrade the frimware from CD.

DO NOT select AVRISP MKII from the connection window. Select JTAGICE MKII instead.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.11 sec. Snitz Forums 2000