MCUmall EPROM BIOS Chip Burner Forum
Home
|
Profile
|
Register
|
Active Topics
|
Members
|
Search
|
FAQ
Username:
Password:
Save Password
Forgot your Password?
All Forums
MCUmall Forums
Novice Place
Can't program AM29F040B with Enhanced
New Topic
Reply to Topic
Printer Friendly
Author
Topic
fredo55
Canada
1 Posts
Posted - 04/28/2006 : 17:56:57
Selected 29F040:
ID as a Fujitsu
erase completed (several times)but Blank Test reads Device is not empty
won't start programming!
This is my first try, any help will be well appreciated
Reply #1
ZLM
2937 Posts
Posted - 05/04/2006 : 16:19:05
The ID is incorrect.
Have to solve the ID issue first.
Check all the DIP setting. Makesure the chip been locked in ZIF.
Topic
New Topic
Reply to Topic
Printer Friendly
Jump To:
Select Forum
MCUmall Forums
General Discuss
Novice Place
True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
GQ-5X
Automobile engine ECU, Immo, Air bag chip tunning
Using The Enhanced/Dual power Willem Programmer
Open Source Project Willem Programmer Hardware
Wellon/WEILEI USB Programmer
TOP USB Programmer
EasyPRO/SmartPRO USB Programmer
PIC Programmer
Using the AVR JTAG ICE and AVRISP ISP programmer
--------------------
Home
Active Topics
Frequently Asked Questions
Member Information
Search Page
MCUmall EPROM BIOS Chip Burner Forum
© Copyright 2003 - 2009 Mcumall Electronics Inc.
Generated in 0.08 sec.
Snitz Forums 2000