MCUmall EPROM BIOS Chip Burner Forum
Home
|
Profile
|
Register
|
Active Topics
|
Members
|
Search
|
FAQ
Username:
Password:
Save Password
Forgot your Password?
All Forums
MCUmall Forums
Using the AVR JTAG ICE and AVRISP ISP programmer
Jtag Nec Emma2ll
New Topic
Reply to Topic
Printer Friendly
Author
Topic
divubi2004
4 Posts
Posted - 04/30/2010 : 14:42:12
Sorry for my very bad english...
I have a board with NEC Emma2ll processor ( D6115 ) and a flash M29W320DT. It's possible read and write the flash with the Jtag adapter with GQ-4X programmer ?
Thanks
Reply #1
ZLM
2937 Posts
Posted - 05/01/2010 : 22:16:25
No. The current JTAG on GQ-4X is only for CPLD devices.
Topic
New Topic
Reply to Topic
Printer Friendly
Jump To:
Select Forum
MCUmall Forums
General Discuss
Novice Place
True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
GQ-5X
Automobile engine ECU, Immo, Air bag chip tunning
Using The Enhanced/Dual power Willem Programmer
Open Source Project Willem Programmer Hardware
Wellon/WEILEI USB Programmer
TOP USB Programmer
EasyPRO/SmartPRO USB Programmer
PIC Programmer
Using the AVR JTAG ICE and AVRISP ISP programmer
--------------------
Home
Active Topics
Frequently Asked Questions
Member Information
Search Page
MCUmall EPROM BIOS Chip Burner Forum
© Copyright 2003 - 2009 Mcumall Electronics Inc.
Generated in 0.07 sec.
Snitz Forums 2000