MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 TOP USB Programmer
 TOP programmer adapter pinouts
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

TQdruide

Germany
2 Posts

Posted - 06/27/2011 :  13:59:49  Show Profile  Reply with Quote

Hi community.

The topwin software shows me the following adapter types:

SDP-UNIV-40TS tsop
SDP-UNIV-44TS
SDP-UNIV-48TS
SDP-UNIV-44 =plcc44
SDP-UNIVv-44PS psop
SDP-UNIV-44TQ tqfp


These are labtool adapter model names.

What does it mean?
I can use the labtool pinouts for the top programmers?
The pin out list can be downloaded from the labtool website.

So I can use two options for adapter pin outs.
1) I program with the PDIP option of the software then I must
make an adapter using
pin name chip package = pin name zif socket of the top programmer
chip pin pb0 must be connected to the programmers zif pin pb0


2) I use the labtool adapters and click on the
M29W400T*48TSOP option -> adapter type SDP-UNIV-48TS

In this example there is no PDIP version.

So the pin outs of option 1) and 2) are probably totally
different.

Is this right?

Top programmer adapter pin outs = labtool adapter pin outs = known adapter pinouts!
Nice!



Regards.
UK

Reply #1

ZLM

2937 Posts

Posted - 06/29/2011 :  19:03:23  Show Profile  Reply with Quote
Those adapters are compatible with Labtool adapter.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.07 sec. Snitz Forums 2000