MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 16bit adapter
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

tahir

United Kingdom
45 Posts

Posted - 06/08/2012 :  06:33:07  Show Profile  Reply with Quote
i have got 16bit adapter it erase fine and blank check fine but when writing i get this error tried all speed settings still fail tried 5v and 3v setting still no fail when it says set to 3.6v does that mean 3volt because there is no 3.6volt jumper setting <TE28F160C3B>>
Set the adapter to 3.6V jumper position.
Load C:\Users\SAMASHERMOMI\Desktop\t\250.BIN
c:\users\samashermomi\desktop\t\250.bin.
This software is updated already.
ID check OK
Writing... Code
Elapsed time: 2.10 seconds.
Write failed, Address=0x000000, Buffer=0x0B Device=0xFF
Write failed

t.hussain
Reply #1

ZLM

2937 Posts

Posted - 06/12/2012 :  08:51:35  Show Profile  Reply with Quote
check your adapter jumper settings.
Go to Top of Page
Reply #2

tahir

United Kingdom
45 Posts

Posted - 06/12/2012 :  12:01:29  Show Profile  Reply with Quote
Hi could give proper jumper settings plz thanks

t.hussain
Go to Top of Page
Reply #3

ZLM

2937 Posts

Posted - 06/12/2012 :  21:29:49  Show Profile  Reply with Quote
see drawing on adapter.



Image Insert:

12.17 KB
Go to Top of Page
Reply #4

tahir

United Kingdom
45 Posts

Posted - 06/13/2012 :  03:43:28  Show Profile  Reply with Quote
thanks zlm will try it i have new problem im running windows7 32bit the softwre locks up shall try to delete and reinstall the software thanks sometimes it works i think my pc could be corrupted thanks

t.hussain
Go to Top of Page
Reply #5

tahir

United Kingdom
45 Posts

Posted - 06/13/2012 :  09:16:02  Show Profile  Reply with Quote
Zlm tried your jumper setting worked a treat got it working also the freezing problem is sorted it was incorrect jumper setting
Done as said no problem thankyou thankyou

t.hussain
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000