MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Using The Enhanced/Dual power Willem Programmer
 willem PCB5-E VPP problem
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

gogos106

2 Posts

Posted - 01/06/2014 :  14:39:13  Show Profile  Reply with Quote
hi....
i have a problem with my willem pcb5-e.....
i set jumpers to 12.5v and then I checked out the voltages...
vpp=15.0v

when i set jumpers to 15v my voltages are
vpp=25.4v

...jumpers to 21v....
vpp=18v
...jumpers to 25v
vpp=29.7

what is going wrong???
Reply #1

ZLM

2937 Posts

Posted - 01/15/2014 :  15:44:33  Show Profile  Reply with Quote
Installed wrong voltage control resistor.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000