MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Open Source Project Willem Programmer Hardware
 Problem writing to 93C56
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Iansbors

2 Posts

Posted - 05/22/2015 :  03:13:10  Show Profile  Reply with Quote
Hi!

I could need some help writing to a 93c56.
I'm able to read the eeprom using 16 bit, but I'm not able to write it back to a eeprom. ( bit read/write works ok.
Everytime I try to write it I get an error message:
Error at 0x000001 Chip=0x7F buffer=0xFF

I've tried using:
0.97ja on PCB3
0.98D2 on PCB35
0.98D5 on PCB35
All gives the same error message.
I've noticed that the red LED is not lightning or flashing during the programming sequence.

Regs. Ian
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.12 sec. Snitz Forums 2000