MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 Old GQ-2X and 27c322 question
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

TommyE

5 Posts

Posted - 06/03/2015 :  22:48:25  Show Profile  Reply with Quote
Hello

Ok, so I've got this old GQ-2X programmer. I've managed to get myself an adapter board for 27C322 chips.

When I use my multimeter to map out A18 A19 and A20 (just to be sure) I find that A18 and A19 is connected together on the programmer. This surely shouldn't be the case??

The Rom I'm creating is holding several smaller roms, and I'm going to be switching between them by using the upper A-lines.

Problem is that some parts of the rom works, guessing there must something with the programmer and the A18 and A19 lines.

Has anyone experienced something like this, and maybe there is an easy fix?

Tommy
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000