MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 Disable verify during write?
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

mhdev

USA
1 Posts

Posted - 06/12/2016 :  00:27:23  Show Profile  Reply with Quote
Is it possible to disable verify during write? I'm trying to write M27C160 chips. They pass the blank check, but writing fails on the first byte saying the device=00. But if I then do a read afterward it shows the byte has the correct value, not zero. It seems like there is something wrong with the verify during write and if I could disable it then it may write the correct data.
Reply #1

ZLM

2937 Posts

Posted - 06/17/2016 :  21:14:01  Show Profile  Reply with Quote
No. There are something wrong and must be fixed.

Check your chip contacting. Also, do a voltage self diagnostic on programmer.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.13 sec. Snitz Forums 2000