MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 PIC Programmer
 PIC Programming on a GQ-4x4 with ADP-023 adapter
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

blustine@gmail.com

1 Posts

Posted - 07/24/2017 :  14:16:33  Show Profile  Reply with Quote
I have a GQ-4x4 programmer and was looking to confirm that in order to use it to program a PIC 18F14K50 device out of circuit, Vdd has to be jumpered to Vusb? I was thinking of buying an ADP-023 adapter socket and then bringing wires from the adapter over to the GQ-4x4 ZIFF socket, as the ADP-023 adapter will not plug into the GQ-4x4 directly. Is this correct. Thanks.
Reply #1

anniel

2529 Posts

Posted - 09/15/2017 :  06:48:49  Show Profile  Reply with Quote
quote:
Originally posted by blustine@gmail.com

I have a GQ-4x4 programmer and was looking to confirm that in order to use it to program a PIC 18F14K50 device out of circuit, Vdd has to be jumpered to Vusb? I was thinking of buying an ADP-023 adapter socket and then bringing wires from the adapter over to the GQ-4x4 ZIFF socket, as the ADP-023 adapter will not plug into the GQ-4x4 directly. Is this correct. Thanks.



You can use this type of DIP headers.


Edited by - anniel on 09/15/2017 06:49:42
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000