MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 GQ-4X4 / ADP-015 / AT89C51RD-24U
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

vendtech

USA
4 Posts

Posted - 04/27/2020 :  16:30:39  Show Profile  Reply with Quote
Real novice here. I have been using a GQ-4 to program firmware for vending machines. Recently had the need to program an AT89C51RC-24U (PLCC44 package) which I have never done. My programmer said I needed an ADP-015, which I didn't have. Went online and purchased one, and while I was at it purchased a GQ-4X4. Was playing around with the new programmer and chose the AT89C51RC from the list, but it says it doesn't need an adaptor. I would have assumed that they would have put the information from older units into the newer units, or is it that this new programmer does not support this chip. Thanks for any input and your time.


Image Insert:

374693 bytes

Image Insert:

169442 bytes

Image Insert:

892877 bytes

Edited by - vendtech on 04/27/2020 16:40:18
Reply #1

laptech

United Kingdom
58 Posts

Posted - 06/01/2020 :  02:47:30  Show Profile  Reply with Quote
Looking at the datasheet of the chip and ADP-15 on the site, I can only assume that the company has incorporated the hardware from ADP-15 into the GQ-4X4 thereby no longer requiring ADP-15.

Laptronics UK LTd. Specialist motherboard repair.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000