MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 General Discuss
 usb pic programmer board not responding
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

wonderfulwaldo

USA
3 Posts

Posted - 10/04/2008 :  00:08:52  Show Profile  Reply with Quote
usb pic programmer

board not responding

i have the right com port (com 5) but it wont respond

it gives me this error message after it resets

http://i538.photobucket.com/scriptlbums/ff343/wonderfulwaldo/IMG_0105.jpg?t=1223107722
Reply #1

ZLM

2937 Posts

Posted - 10/04/2008 :  13:11:01  Show Profile  Reply with Quote
The image can not be found from the above link.
Anyway, if you confirm your driver is correctly loaded and you assigned a correct comport number to the software, then you may need to check the programmer.

The first reset error you can ignored. You can place the chip and try to read the chip.

Also, try on the another computer and see if it makes difference.

If still does not work, then contact support@mcumall.com with your order number/eBay item numer for further assistance.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.1 sec. Snitz Forums 2000