MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Open Source Project Willem Programmer Hardware
 Strange Problem with 29c256
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

vincentes2000

France
6 Posts

Posted - 10/26/2005 :  01:15:11  Show Profile  Reply with Quote
Hi

When I burn the AT29C256 With with Byte 'FO' or 'D0' or 'B0' or '90' in the beginning of the sector (64 Bytes) ( adress 0000000, 0000040, 0000080...) : I have a error writing on this sector ... if i change this value with any values (FF, F1, D1), the burn process continue without problem...

The problem is only on the first Byte of the sector With with Byte 'FO' or 'D0' or 'B0' or '90'.

This is Hardware Problem (Burner), Chip corrupted (AT29c256) or Software problem (0.90ja)

Have you a idea of this problem ?

Thank's

Vincent
Reply #1

ZLM

2937 Posts

Posted - 10/26/2005 :  13:36:18  Show Profile  Reply with Quote
I used 0.97ja every day on AT29C256 and without problem. So, the software should be fine.
The hardware seems working too since it can write all other bytes.
Try on a different AT29C256, if it's the same problem, I'll guess the software's running is interrupted by other higher priority software. Try to close the software and restart again, it will make different. Also, close all other high priority or real time software such as anti-virus software.
Go to Top of Page
Reply #2

vincentes2000

France
6 Posts

Posted - 10/27/2005 :  00:20:40  Show Profile  Reply with Quote
quote:
Originally posted by ZLM

I used 0.97ja every day on AT29C256 and without problem. So, the software should be fine.
The hardware seems working too since it can write all other bytes.
Try on a different AT29C256, if it's the same problem, I'll guess the software's running is interrupted by other higher priority software. Try to close the software and restart again, it will make different. Also, close all other high priority or real time software such as anti-virus software.



Yes, i will try with a different AT29c256...

On my Computer, only 1 Sofware is installed : Burned Sofware 0.97ja
Without other Software...

This is very Strange that i can write all byte on other adress....
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.12 sec. Snitz Forums 2000