MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 Programmer for 49LF040 and 39SF020.
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

jibanes

4 Posts

Posted - 10/05/2009 :  15:54:54  Show Profile  Reply with Quote
Hello,

Which programmer should I use for the following Eeproms:

* 49LF040B
* 39SF020A

As you have guessed, they are PC bioses, is it possible to just feed the programming software with the .bin file?

I do not have a parallel port, therefore, whichever programmer you recommend would have to be either serial or usb. Preferably, I would also like a ZIF socket for these Eeproms (on the programmer).

Finally, do you recommend any particular "extractor tool?", do you sell any?


Sincerely,
Jerome

Edited by - jibanes on 10/06/2009 10:47:11
Reply #1

ZLM

2937 Posts

Posted - 10/06/2009 :  13:57:25  Show Profile  Reply with Quote
The GQ-4X or GQ-3X will work on those chips.

If your chip is in DIP package, then you do not need any adapterd. Other wise you may need adapters for your chip.

"extractor tool"from PCB? SMD Reworkstation will work.
Go to Top of Page
Reply #2

jibanes

4 Posts

Posted - 10/06/2009 :  16:04:59  Show Profile  Reply with Quote
quote:
Originally posted by ZLM

The GQ-4X or GQ-3X will work on those chips.

If your chip is in DIP package, then you do not need any adapterd. Other wise you may need adapters for your chip.

"extractor tool"from PCB? SMD Reworkstation will work.



Thank you I have just ordered GQ-4X (Full Kit).

J.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.13 sec. Snitz Forums 2000