MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 EasyPRO/SmartPRO USB Programmer
 EasyPRO 80B & 2716 programming
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

everythingelectronics

1 Posts

Posted - 08/25/2006 :  08:41:02  Show Profile  Reply with Quote
I've got the EasyPRO 80B and I am trying to program some 2716 (various TI, Intel, Hitachi) EPROMs but I can't seem to do so. It always comes up with an error. It reads perfectly. When I program all FFs into the chip, it programs just fine. Also, it will program them when I read one that is already programmed, as long as I don't alter the contents of it. I've got some old Williams EPROMS that I have the hex files for and would like to burn these. I'm using the AM2716B@DIP24 algorithm..is this right? Got all of the updates for it too. Any information is appreciated.
Reply #1

ZLM

2937 Posts

Posted - 08/28/2006 :  16:41:03  Show Profile  Reply with Quote
The EasyPro80B has no generic algorithem for all 2716. It only supports the 2716 wich is listed in the device list.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000