MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 MX29F00-T, "ERROR at 0x01F193 Chip = 0xFF buffer =
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

reiluke

2 Posts

Posted - 09/14/2006 :  22:57:44  Show Profile  Reply with Quote
Hi sirs,

I bought a enhanced willem programmer from mcumall heres what i did.

1. inserted my chip MX29F00-T
2. ran willem app .97ja, selected MX29F00-T as device
3. Set my DIP Position per indicated
4. I check get id it showed MATRONIX MX29F00-T so its correct
5. read the chip 100% ok, saved it to a file
6. erased the chip 100% erased, blank check 100% it said its blank
7. click on search button and click on unlock
7. loaded my rom file, clicked program
8. it stopped "ERROR at 0x01F193 Chip = 0xFF buffer = 0xC7

im sorry but i have never used a programmer before, i bought it
just to reprogram my dead laptop.

any help would be appreciated

thank in advance sirs

Edited by - reiluke on 09/14/2006 23:20:23
Reply #1

reiluke

2 Posts

Posted - 09/15/2006 :  02:38:38  Show Profile  Reply with Quote
i tried the programmer with my laptop, 100% programmed my chip, now to test with my dead laptop. thanks all
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000