MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 program pic 16F872 SOIC 28
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

esdave

United Kingdom
2 Posts

Posted - 06/07/2012 :  05:39:21  Show Profile  Reply with Quote
Could any body please tell me if I need an adaptor to program/test PIC 16F872 soic 28 smd in circuit, the header connections are next to the pic on the pcb and I have tried connecting wires from the GQ-4X to the pic header,I have traced connections back from pic to header ie Vpp/RB6/RB7/VDD/VSS ,but cannot test it just says please wait or check connections, the pic out of circuit test ok in adaptor CNV-SOP28.
I have not switched the pcb on for power to pic , I am using power of GQ-4X.

Thank you for any help.
Dave
Reply #1

ZLM

2937 Posts

Posted - 06/12/2012 :  08:54:01  Show Profile  Reply with Quote
Just connect Vpp/RB6/RB7/VDD/VSS pins from programmer ZIF socket to your PCB ICSP port. It will work. You can use jumper wires to do that.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000