MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 GQ-3X programmer out of service ????
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Seiz

France
7 Posts

Posted - 05/03/2015 :  20:48:54  Show Profile  Reply with Quote
Hello everyone,

Here , I have a GQ -3x programmer who was working perfectly until yesterday (except an encoding problem reading but not blocking) .

Since yesterday, my programmer does not detect the EPROM .

Indeed, despite a complete re- installation on 2 different computers with different EPROM , I can no longer detect the ID chip .

I continually FFFF as ID .
Like that :


My programmer is it out of service ?

The green LED is on, the programmer is detected, it turns red and orange when I clik on "ID" , but nothing more ....


Please help me I need it quickly.

Thank you a lot.

Seiz
Reply #1

ZLM

2937 Posts

Posted - 05/04/2015 :  19:17:11  Show Profile  Reply with Quote

Try to read the chip and see if the reading is OK.

Also confirm the chip is good and with good contacting with adapter.
Change to another chip and try.
Go to Top of Page
Reply #2

Seiz

France
7 Posts

Posted - 05/11/2015 :  07:42:27  Show Profile  Reply with Quote
Hello,

Thanks for reply.

I've try with many different chip (new and old, 29F200 or 29F400 but it's same problem)

All contact are good. Before, if a contact was bad, software autofind a bad DEVICE bt here, he find nothing.

It's possible to reset or update firmware ?

Edited by - Seiz on 05/11/2015 07:43:08
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000