MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 GQ-4X Win10 Bacth Run (Auto)
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

ReneBrunier

France
2 Posts

Posted - 11/16/2015 :  02:46:48  Show Profile  Reply with Quote
Hi MCUmall,

I was using GQ-4X Re=1.40 (SW Re=3.36) on a W8.1 machine. Was good.
I just updated to W10 and now the batch run button is no more working.




It looks like burning is running but in reality the chip is not burned at all. Even more verification tells everything is fine but it is not (I used to select 'Verify' in the batch tool).
To get a "real" comparison, I have to open the code file again and launch a 'Verify' command. It then shows that the chip does not have the same code as the source file....

Looks like the "Auto" button is re-writing the same code as the one into the chip ????

No other way than to do the operations "manually" : clear/ check blank / Write / Verify.

Not sure if I need to update the software ??
any clue ?

thanks

René
Reply #1

ZLM

2937 Posts

Posted - 11/18/2015 :  08:04:58  Show Profile  Reply with Quote
Update you software to latest version.
Go to Top of Page
Reply #2

ReneBrunier

France
2 Posts

Posted - 11/19/2015 :  00:57:59  Show Profile  Reply with Quote
Thanks ZLM

Downloded Re6.38 and its working again.

René
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000