MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 pic 16F627 is it no-longer supported?
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Sarah_B

United Kingdom
5 Posts

Posted - 01/09/2016 :  01:42:48  Show Profile  Reply with Quote
Hi. I have a CQ-4X with the latest download or the softwre for it.

I can't find PIC 16F627 on the list any more. 16F627A and the 16F628/A
are there... I have tried using the 16F627A to program the device but it gives the "ID check failed.("2907A0")" etc..
Here's a listing of cut/pasted from the programmer... Any ideas?
I have a good stock of these and they are ok with the smaller routines.

ID check failed.("2907A0")
Please check device type, chip's orientation and pin contact.
Some OEM chips may have compatible chip ID
Continue?
Yes
ID check skipped
Writing... Buffer
Elapsed time: 8.74 seconds.
Device write completed OK
ID check failed.("2907A0")
Please check device type, chip's orientation and pin contact.
Some OEM chips may have compatible chip ID
Continue?
Yes
ID check skipped
Writing... Data
Elapsed time: 0.00 seconds.
Device write completed OK
ID check failed.("2907A0")
Please check device type, chip's orientation and pin contact.
Some OEM chips may have compatible chip ID
Continue?
Yes
ID check skipped
Writing... User ID
Elapsed time: 0.00 seconds.
Device write completed OK
ID check failed.("2907A0")
Please check device type, chip's orientation and pin contact.
Some OEM chips may have compatible chip ID
Continue?
Yes
ID check skipped
Verifying... Buffer
Verify Failed, Address=0x000000, Device=0x3F, Buffer=0x16
Verify Failed
Elapsed time: 38.58 seconds.
Not initialized
H/W Re: -(SW Re. 6.38)
USB Driver Re.2.0
Software Re. 6.38


Many Thanks
SB
Reply #1

ZLM

2937 Posts

Posted - 01/12/2016 :  17:04:47  Show Profile  Reply with Quote
PIC16F627 is difference to PIC16F627A.

Try to add following line:
Name="PIC16F627",ID="2907A0",Class="PIC16F628A",Category="MCU",MFG="Microchip",ENDPRG_COMMAND="",BEGERASECHIP_COMMAND="8",DeviceFile="PIC16F627.dev";
Go to Top of Page
Reply #2

Sarah_B

United Kingdom
5 Posts

Posted - 01/15/2016 :  01:47:54  Show Profile  Reply with Quote
AAaah... that line was commented-out... I wonder why?
I'll check now to see if it's all working as it should..

Many thanks ZLM

Sarah
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000