MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 gq-4x unable to read 39vf6401
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

prf1

Ireland
2 Posts

Posted - 10/02/2017 :  03:03:56  Show Profile  Reply with Quote
I am unable to read flash 39vf6401 .. I was getting an error with the device id and noticed in the device text the was incorrect..have amended that and reading device id correctly now..when I try to read the programmer fails at 50 % and gives an error of " address exceeded range . Internal error.. I have checked and device text and the codesize is 8288608 which is correct
I can read it with 39vf3201 without any errors but the file size is incorrect
Please help

Thanks

Paul Foley
Reply #1

ZLM

2937 Posts

Posted - 10/05/2017 :  07:01:01  Show Profile  Reply with Quote
It seems last address bit has problem. This need to be checked in software.

Does it read correctly?
Go to Top of Page
Reply #2

prf1

Ireland
2 Posts

Posted - 10/26/2017 :  05:24:43  Show Profile  Reply with Quote
Hi..It will only read as far as 50% then the GQ-4X crashes.. It will read fine when I select 39vf3201

Paul Foley
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000