MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 unable to write 5P08C3

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:
UserName:
Password:
Format Mode:
Format: BoldItalicizedUnderlineStrikethrough Align LeftCenteredAlign Right Horizontal Rule Insert HyperlinkInsert EmailInsert Image Insert CodeInsert QuoteInsert List Spell Checker
   
Message:

* HTML is OFF
* Forum Code is ON
Smilies
Smile [:)] Big Smile [:D] Cool [8D] Blush [:I]
Tongue [:P] Evil [):] Wink [;)] Clown [:o)]
Black Eye [B)] Eight Ball [8] Frown [:(] Shy [8)]
Shocked [:0] Angry [:(!] Dead [xx(] Sleepy [|)]
Kisses [:X] Approve [^] Disapprove [V] Question [?]

   Insert an Image File
Check here to include your profile signature.
    

T O P I C    R E V I E W
Dayananda Posted - 06/19/2018 : 12:46:58
Hi,
i recently purchased an GQ-4x4 updated the software and usb drivers. i am able to read the 5P08C3 eeprom data. but unable to write.i get the below mention error.
Device write complete ok
ID check Skipped
verifying... Buffer
Verfify Failed, Address = 0x00053, device = 0x03, Buffer = 0xff
I have attached the screen shoot of the same
waiting for your reply
Regards
Dayananda.T

Image Insert:

97321 bytes
2   L A T E S T    R E P L I E S    (Newest First)
anniel Posted - 06/20/2018 : 03:34:01
quote:
Originally posted by davebb

Hi this works fine on my GQ-4X old ,
if I was you I would unscrew the programmer and test all pins on the zif socket to the pcb connectors with a multi meter, as I have found one pin not connected but the solder looked good,
Dave



No need to open up the programmer to test it, you can simply use the software...

davebb Posted - 06/19/2018 : 22:50:20
Hi this works fine on my GQ-4X old ,
if I was you I would unscrew the programmer and test all pins on the zif socket to the pcb connectors with a multi meter, as I have found one pin not connected but the solder looked good,
Dave

MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.05 sec. Snitz Forums 2000